RCU Forums
Tightly operated to show less track deviations
Tightly operated to show less track deviations
0 2023/04/15 23:08:43
Check by hanging it on the sprocket that was made last time
Check by hanging it on the sprocket that was made last time
0 2023/04/15 23:08:40
The connection is more natural and powerful
The connection is more natural and powerful
0 2023/04/15 23:04:06
The sample of the casting track by outsourcing arrived the other day.
The sample of the casting track by outsourcing arrived the other day.
0 2023/04/15 23:04:04
0 2023/04/15 23:03:28
Check and disassemble the sprocket spacing
Check and disassemble the sprocket spacing
0 2023/04/07 16:31:15
Re-decomposing and waiting
Re-decomposing and waiting
0 2023/04/07 16:31:12
Re-decomposing and waiting
Re-decomposing and waiting
0 2023/04/07 16:31:10
final inspection
final inspection
0 2023/04/07 16:31:07
final inspection
final inspection
0 2023/04/07 16:31:04
full-scale welding
full-scale welding
0 2023/04/07 16:31:02
Modify Location
Modify Location
0 2023/04/07 16:30:59
Temporary fixation with point welds
Temporary fixation with point welds
0 2023/04/07 16:30:56
Position the sawtooth with the 3D sculpture made in episode 1
Position the sawtooth with the 3D sculpture made in episode 1
0 2023/04/07 16:30:54
Position the sawtooth with the 3D sculpture made in episode 1
Position the sawtooth with the 3D sculpture made in episode 1
0 2023/04/07 16:30:51
Assemble the top and bottom sawtooth plates and shape them
Assemble the top and bottom sawtooth plates and shape them
0 2023/04/07 16:30:49
Made in a lifelike shape for structural strength and three-dimensional effect of scale
Made in a lifelike shape for structural strength and three-dimensional effect of scale
0 2023/04/07 16:30:46
Welding of the outer fixing plate on the other side of the cylinder
Welding of the outer fixing plate on the other side of the cylinder
0 2023/04/07 16:30:44
Finished welding fixed parts on top and bottom of cylinder
Finished welding fixed parts on top and bottom of cylinder
0 2023/04/07 16:30:41
It's a stressed area, so thorough welding is required
It's a stressed area, so thorough welding is required
0 2023/04/07 16:30:38
This place will be fixed with a hexagonal bolt later
This place will be fixed with a hexagonal bolt later
0 2023/04/07 16:30:34
Remove the guide plate. Wrench bolts did not fall out due to thermal deformation when welding was performed without removal, as in the case of 2022 model
Remove the guide plate. Wrench bolts did not fall out due to thermal deformation when welding was performed without removal, as in the case of 2022 model
0 2023/04/07 16:30:32
Conduct fixed point welding
Conduct fixed point welding
0 2023/04/07 16:30:29
Welding preparation
Welding preparation
0 2023/04/07 16:30:26
Check Status
Check Status
0 2023/04/07 16:30:23
Fine-tune the plane so that it is perpendicular to the cylinder.
Fine-tune the plane so that it is perpendicular to the cylinder.
0 2023/04/07 16:30:21
Insert the above assembly into the cylinder.
Insert the above assembly into the cylinder.
0 2023/04/07 16:30:18
Complex structures overlap. First, temporarily adjust the guide plate and seal reader insert plate.
Complex structures overlap. First, temporarily adjust the guide plate and seal reader insert plate.
0 2023/04/07 16:30:16
Fix with a temporary fixing wrench bolt.
Fix with a temporary fixing wrench bolt.
0 2023/04/07 16:30:13
Once the cylindrical structure has been completed, welding will begin to secure the sawtooth gear wheels.
Once the cylindrical structure has been completed, welding will begin to secure the sawtooth gear wheels.
0 2023/04/07 16:30:11
Carefully weld the coupler and cylinder firmly.
Carefully weld the coupler and cylinder firmly.
0 2023/04/02 21:32:45
Later, the drive shaft to which the hexagonal round bar is coupled is joined in the above shape
Later, the drive shaft to which the hexagonal round bar is coupled is joined in the above shape
0 2023/04/02 21:32:42
Welded with care for thermal deformation
Welded with care for thermal deformation
0 2023/04/02 21:32:38
It's a 360 degree welding
It's a 360 degree welding
0 2023/04/02 21:32:34
Again, use a small thread reader to heat-deform and hold the deflection
Again, use a small thread reader to heat-deform and hold the deflection
0 2023/04/02 21:32:30
Tig weld the coupling between the coupler and the seal leader
Tig weld the coupling between the coupler and the seal leader
0 2023/04/02 21:32:26
Prevents thermal deformation by inserting a piece of hexagonal ring rod into the coupler before welding the coupler and cylinder
Prevents thermal deformation by inserting a piece of hexagonal ring rod into the coupler before welding the coupler and cylinder
0 2023/04/02 21:32:22
Tap Prevents thermal deformation by inserting a piece of hexagonal round bar into the coupler before welding the coupler and the cylinderand align with a small cylindrical pipe
Tap Prevents thermal deformation by inserting a piece of hexagonal round bar into the coupler before welding the coupler and the cylinderand align with a small cylindrical pipe
0 2023/04/02 21:32:19
Align the coupler and cylinder vertically with each other for welding
Align the coupler and cylinder vertically with each other for welding
0 2023/04/02 21:32:15
The coupler is welded thickly
The coupler is welded thickly
0 2023/04/02 21:32:12
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.